EOT CRANES

KaneXT Single Girder and Double Girder E.O.T. Cranes are designed and manufactured in accordance with IS:3177 and IS:4137.
Considering adequate factor of safety with respect to appropriate duty. the structural parts of the cranes are designed in
accordance with IS:807. KaneXT also manufactures cranes as per international standards. KaneXT cranes are manufactured
with standard components and controls to ensure reliability.

single girder eot crane
image--006

SINGLE GIRDER EOT CRANES

 

Span
3 mtrs. to 35 mtrs.

Safe Working Load
500 kgs. to
20,000 kgs.

Crane Control

From floor through Pendant Push Buttons, Optionally Through Radio
Remote Control / cabin with master control.

Motors

Squirrel Cage & Slip Motors based on application requirements, built-in
separator electrically operated fail to safe brakes for all three motions.
Motors with ‘F’ class insulation provided in all motions.

Power Supply System

To Hoist and Cross Travel through Trailing Cables / Drag Chain to Crane
through Shrouded Bus Bars / Trailing Cable / MS Angle Iron Conductors /
Bare Copper Conductors (depending on customer’s choice and application).

double girder eot crane
image--006

DOUBLE GIRDER EOT CRANES

 

Span

5 mtrs. to 40 mtrs.
Safe Working Load
500 kgs. to
2,00,000 kgs.

 

Class of Duty/Standards

Equivalent to M3, M5, M7, M8 as per IS:3177 / IS:807

Drive System

Accordance with IS : 3177 Structural Parts With IS : 807
and Other Miscellaneous Parts with IS : 3177, IS : 3938
and IS:4137

Speeds

Selected depending on client specifications/application/
shed dimensions

GOLIATH CRANES

KaneXT make Goliath cranes are designed and manufactured in accordance with IS:3177 and IS:4137. Considering adequate factor of
safety with respect to appropriate duty. The structural parts of the cranes are designed in accordance with IS:807. KaneXT also
manufactures cranes as per international standards. KaneXT cranes are manufactured with standard components and controls to ensure
reliability. Our wide range of goliath cranes are useful for handling material resources for various industries and projects.

semi gliath cranes
image--008

SEMI GOLIATH CRANES

 

Span

5 mtrs. to 20 mtrs.

Safe Working Load

1000 kgs. to
60,000 kgs.

Crane Control

From floor through Pendant Push Buttons, Optionally Through Radio
Remote Control / cabin with master control.

Motors

Squirrel Cage & Slip Motors based on application requirements, built-in
separator electrically operated fail to safe brakes for all three motions.
Motors with ‘F’ class insulation provided in all motions.

Power Supply System

To Hoist and Cross Travel through Trailing Cables / Drag Chain to Crane
through Shrouded Bus Bars / Trailing Cable / MS Angle Iron Conductors /
Bare Copper Conductors (depending on customer’s choice and application).

 

 

goliath cranes
image--010

GOLIATH CRANES

 

Span

5 mtrs. to 50 mtrs.
Safe Working Load
1000 kgs. to
1,00,000 kgs.

Class of Duty/Standards

Equivalent to M3, M5, M7, M8 as per IS:3177 / IS:807

Drive System

Accordance with IS : 3177 Structural Parts With IS : 807
and Other Miscellaneous Parts with IS : 3177, IS : 3938
and IS:4137

Speeds

Selected depending on client specifications/application/
shed dimensions
Selected depending

JIB CRANES

KaneXT jib cranes meet the most demanding material handling requirements.
There are various jib crane models from which to choose : floor-mounted pillar
types; top and bottom-supported units; wall or column-mounted version
and models that afford manual or motorized rotation. Built to the
highest industry standards. KaneXT jib cranes have earned a reputation for
ruggedness and durability

jib cranes
image--020

JIB CRANES SPECIFICATION

 

Span

2 mtrs. to 7 mtrs.

Safe working load

250 kgs. to 5,000 kgs.

Crane Control

From floor through Pendant Push Buttons, Optionally Through Radio Remote
Control / cabin with master control.

Motors

Squirrel Cage, based on application requirements, built-in separator
electrically operated fail to safe brakes for all three motions. Motors with
‘F’ class insulation provided in all motions.

Power Supply System

To Hoist and Cross Travel through Trailing Cables / Drag Chain
(depending on customer’s choice and application).

Drive System

Accordance with IS : 3177 Structural Parts With IS : 807 and Other
Miscellaneous Parts with IS : 3177, IS : 3938 and IS:4137

Speeds

Selected depending on client specifications/application/ shed dimensions

Class of Duty/Standards

Equivalent to M3, M5, M7, M8
as per IS:3177 / IS:807

 

CAGE HOIST ARRANGEMENT

Flame Proof and Non Flame Proof types of goods lifts are suitable for wall type canopy as well as self-supporting
steel structure. KaneXT has unique arrangement of providing four “T” guides for balanced loading and guide
rollers for smooth and efficient drive. The goods lift is being operated by push button station fixed outside the
cage on respective floors.

flame proof
image--024

FLAME PROOF / NON FLAME PROOF

 

Floor Level

Ground level + 10

Pay Load Capacity

500 kgs. to 5,000 kgs.

 

The floor doors are provided with mechanical and
electrical locking arrangement. Hence unless floor door
is closed properly, lift cannot be started. additional
gravity limit switch is provided for extra safety. In case
of failure of over hoisting limit switch, power will be cut
off by gravity limit switch upon over traveling of the cage.

Every single rope is having rated capacity with min.
6 F.S. which in four fall construction will provide four
times the required F.S. Hence even in case of breakage
of 3 wire ropes out of 4. the cage will not fall. This is extra
safety over any other conventional similar type goods lift

The cage is made of rolled steel sections and sides are
covered with bumped sheets. Cage top is covered with
M.S. Sheets and bottom is covered with chequered plate
for antiskid property. Collapsible doors are provided on
cage as per entry and exit position. The cage is being
guided with rollers on “T” guide rail. Antifriction bearings
are provided for smooth and efficient traveling with low
friction and longer life.

 

 

HOISTS

KaneXT flame proof hoists are manufactured in wide range like
lifting capacities between 250 kgs. to 25,000 kgs., lifting height
up to 50 mtrs., with various types of cross travel trolleys like
power travel type, hand geared travel, push pull trolley, flexible
trolley to negotiate even a small radius.

flame proof hoists
image--030

FLAME PROOF HOISTS

 

Class of Duty /Standards

IS : 3938 and IS : 2148

Safe Working Load

250 kgs. to
25,000 kgs.

 

KaneXT flame proof hoists are offered for gas group I, IIA and IIB
sutable for zone-1 and zone-2 areas whereas for gas group IIC
flame proof hoists are offered only for zone-2 areas.

KaneXT flame proof hoists are designed in modular construction
which greatly simplifies repairs and cuts down time. KaneXT flame
proof hoists are designed in accordance with IS-3938. All electrical
apparatus are housed in flame proof enclosures confirming to
IS - 2148 and mechanical components are designed so that there is
no ferrous metal to ferrous metal contact in order to avoid any
chance of sparkling. Hence KaneXT flame proof
hoists are flame proof as well as spark proof.

FOR THE FASTGROWING COMPANIES

KaneXT Wire rope hoists are designed in modular construction which
greatly simplifies repairs & cuts down-time. The special features are low
head-room, spur/ helical gears running on antifriction ball bearings with
oil bath lubrication, motors confirming to IS 325, “fail to safe” breaks
which automatically operate in case of any power failure, tested wire
rope confirming to IS 2266, forged hooks conforming to IS 3815 and
push button stations operating at step down voltage of 110 V:42 V or 24V.

wire rope hoists
image--030

WIRE ROPE HOISTS

 

Safe Working Load

500 kgs. to
25,000 kgs.

 

Crane Control

From floor through Pendant Push Buttons, Optionally
Through Radio Remote Control.

Motors

Squirrel Cage & Slip Ring Motors based on application requirements, built-in separator electrically operated fail to safe brakes for all three motions.
Motors with ‘F’ class insulation provided in all motions.

Power Supply System

To Hoist and Cross Travel through Trailing Cables / Shrouded type DSL
System (depending on customer’s choice and application).

Drive System

Drive through Squirrel Cage Induction Geared Motors
with Built-in fail to safe brakes.

Speeds

Selected depending on client specifications /applications / shed dimensions

Class of Duty / Standards
Equivalent to IS 3938

 

CHAIN HOISTS

KaneXT electric chain hoists are designed in modular construction for easy
maintenance. the special features like low headroom, spur gears running on
antifriction ball bearings with oil bath lubrication, motors confirming to IS/BS/DIN etc.
make. KaneXT chain hoists unbeatable to its price. KaneXT chain hoists are
available in hook suspension type, Push pull trolley type, hand geared trolley type,
power travel trolley type and flexible trolley type to negotiate small radius.

chain hoists
image--040

CHAIN HOISTS

Safe Working Load

500 kgs. to 2,000 kgs.

Concentrated design for high substance.

Quality Designed forged steel top and bottom hooks.

Precision shaped load sheave is mounted to assure
minimal wear and smooth operation.

CHAIN PULLEY BLOCKS

KaneXT chains pulley blocks are designed and manufactured in accordance
with IS 3832 and are available in Hook suspension type, push-pull trolley type
and geared trolley type. Load chain used is graded alloy steel chain and hand
chain is m.s. calibrated to relevantt Indian standards and international standards

chain pully hoists
image--038

CHAIN PULLEY BLOCKS

 

Safe Working Load
Capacity upto 20 Tons.

Low Headroom.

Positive Transmission
(Bearing Supporter).

Lubrication :
Totally enclosed gear case is
packed with sufficient grease.

CRANE SPARES & SERVICES

kanext-services

Kanext Products

Updated on 2019-04-24T07:17:52+00:00, by admin.